Zach

FOLD App Review | How To Earn Free Sats Back In 2020

In this Fold App Review, I am going to discuss why this free app is a good way to start accumulating free bitcoin and start “stacking sats” as they say. I’m always looking for new ways to start accumulating more bitcoin and finding real world use cases where I can do so, outside fo buying it directly from an exchange.

This is primarily targeted for mobile use (using their iOS and Android app) for using this. If you want to learn about ways to earn free bitcoin while shopping on a desktop computer, then I would check out my full review of Lolli App, HERE.

I am going to touch on some of the basics of how much you can earn with it, how it works, who it’s really designed for, and my overall feelings of if it’s actually worth using. If that is what you’re looking for, then look no further!

Who Is The Fold App Intended For?

 

If you frequently make purchases with Amazon, Uber, Starbucks, Target, and Sephora (to name a few), then this app is for you. This app allows you purchase discounted gift cards, as well as earn free bitcoin (satoshis) for each purchase that you make. Once the order goes through, it’s credited to your bitcoin wallet within the app almost immediately.

This is designed not only to save you money on what you are already spending, but allows you to earn free bitcoin rewards for doing so. If you’re already spending at these places, why not get free bitcoin for doing it, right?

In the app, you can always see which vendors have offers and they are adding more all the time. Additionally, the discount your receive varies for each vendor. For example, Airbnb will give you 3% cash (bitcoin) back, but L.L. Bean will give you 10% back. The app is constantly updating to offer you the best deals.

How Does The Fold App Work?

 

 

This works for both online and physical locations. Since it’s gift card based, once you make a purchase in the app, it will generate a gift card and a bar code on your screen, for the cashier to scan and use directly.

This will also provide a “gift card code” for you to enter at on-line checkout and you can mix and match between buying online and in store as much as you want with no penalties or fees.

I will break it down step by step below on how to set this up and how it works in a few simple steps.

 

NOTE: You will receive the bitcoin rewards for the amount of gift card purchased, not the actual products you buy with them.

 

  • Load a gift card you buy with Bitcoin on the Fold app, to your account

  • Use that gift card at select retailers and restaurants by using the barcode or the number beneath it.

  • You can make online purchases with your Fold gift card or you can purchase at physical locations

  • At physical locations, all you need is to scan the bar code from the app on your phone at the cash register

  • Every purchase you make with the gift cards that you have on your Fold app will credit you with Bitcoin cashback

  • The amount of Bitcoin cashback you get on any purchase depends on the individual retailer or restaurant

 

Is The Fold App Worth Using?

 

If you are looking to start dipping your toe into cryptocurrency and you’re not quite ready to buy it directly yet, then this is for you! This is a seamless way for you to spend your normal fiat currency and start earning bitcoin back on direct gift card purchases.

This is also good for sending gifts directly, so whether it’s the holidays and you want to send a gift via email (or Twitter) you can earn bitcoin to your wallet for doing so. This can be used for any occasion as well, not just for gifting.

For the avid crypto users, they are also implementing lightning payments this year as well, so you’ll receive even more discounts if you decide to grow the crypto-economy by paying with crypto, instead of using a debit/credit card as well. More on that as it develops…

So, is the Fold App worth using? I would definitely say yes. Especially if you spend frequently at these places anyways and purchases exceed at least 15$ in most cases, then there is no downside here, only upside.

What do you think? Would you use the Fold App for free bitcoin? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people accumulate and secure their crypto.

CoinMine One Review (2020) – Is It Worth Buying? My Experience After 3 Months

In this Coinmine One review, I am going to talk about my experience with not only the user experience in the last few months, but if I think it’s a viable option for crypto mining, so stay tuned for the whole article to get my scoop.

I recently wrote an in-depth article before I received the device outlining the features and selling points I perceived it to have and I still hold true to those beliefs, but there are also some changes after actually using the device that I didn’t take into consideration. It’s a good read and it can be found HERE.

But in this article, I want to focus in on specifically who this device is for? Is it what I expected? And ultimately, if I think it was worth the price of the device (Which you can receive a special discount on below if you are interested).

CLICK HERE TO BUY THE COINMINE FOR ONLY $649 WHEN USING DISCOUNT CODE “BITCOINLOCKUP” AT CHECKOUT

Who Is the CoinMine One Intended For?

 

This at-home crypto miner is designed for the new user to crypto that wants to start participating into mining, without having the learn all the technical intricacies that go along with it.

For instance, when I first unboxed the device and plugged it in for the first time, all I did was download the app, scan the QR code that came in the box to connect it, and within 2 minutes I was mining my first cryptocurrency.

.It was stupidly easy to setup and very easy to figure out. You can mine up to 6 different coins currently ( ZCash, Monero, Grin, Ethereum, Handshake, and Bitcoin) and can switch between them whenever you want all within the app.

Additionally, you can choose “Bitcoin” mode that will mine the most profitable coin on the app and automatically convert it on the backend into your bitcoin wallet if all you want is bitcoin at the end of the day. This is makes it easy to set it and forget it and will automatically utilize the device in the most efficient way to get bitcoin into your wallet, even though you aren’t “mining” it directly.

 

Is The CoinMine One Device What I Expected?

 

Overall, I came into this purchase understanding that this wasn’t going to be the most profitable way to mine cryptocurrency. For me, I knew this device would be easy to use, require no maintenance, and I could literally set it and forget it.

Additionally, since I’ve received the device, they’ve added a free feature that allows you to compound interest by leaving your funds in the wallet they provide you by 6.5% per month. This is a free service that is a win-win for accruing your funds faster.

Now, you can transfer your earned funds into your own wallet, once you hit the minimum withdrawal amount, but I personally don’t because I like to utilize a portion of my crypto to earn interest and have it go to work for me.

I also want to point out that this device is super quiet and does not generate almost any heat, like most mining rigs do. This is quieter and sleeker than a playstation and takes less power too. This can easily go in every kitchen, office, or bedroom (if you want a nightlight), without causing a disruption.

If your goal is to participate in mining and earn passive income without: tons of work, research, loud noises, and excessive cooling and electricity costs, you won’t be disappointed.

CLICK HERE TO BUY THE COINMINE FOR ONLY $649 WHEN USING DISCOUNT CODE “BITCOINLOCKUP” AT CHECKOUT

Is The CoinMine One Worth The Price Of $799?

 

At their normal price of $799, it can seem a little steep, but it will eventually pay off, because cryptocurrency is still very early.

Luckily for you, I have a special referral code for my readers so they can utilize my specific Coinmine One discount code. All you need to do is click HERE and enter code “BITCOINLOCKUP” at checkout to drop the price to only $649.99, saving you some money right away.

This is the best discount they offer, so I wouldn’t expect to find it cheaper anywhere else. At this price, it’s definitely worth it and it’s been nothing but a positive experience and with the compound interest option automatically applied, you’ll recoup your initial investment sooner than you think. There is no longer a reason to wait!

CoinMine One Conclusion

 

Overall, Is this device the most efficient way to mine cryptocurrency? No. Is this the path to the most profitability to participate in cryptocurrency mining? No. So why would I do it?

This is designed for people that are new to the ecosystem that want to participate in securing the network of the coin they want to support and allows them to do it easily and safely without ANY technical knowledge required. It takes more skill to setup a playstation than it does with this device.

You can use the calculator on the site to see how long it could take to break even or become profitable, but you shouldn’t expect a return within the first year. Now, it is possible to become profitable much quicker, but that ultimately depend on the overall market and price of the coin you are mining.

So, is it worth the price? That honestly depends, for me this wasn’t strictly about profitability but finding a non-technical way to quickly and easily immerse myself into the ecosystem and be apart of something better!

CLICK HERE TO BUY THE COINMINE FOR ONLY $649 WHEN USING DISCOUNT CODE “BITCOINLOCKUP” AT CHECKOUT

What do you think? Would you buy the CoinMine One? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

Ellipal Titan vs D’CENT (2020) | Which Wireless Hardware Wallet Is More Secure?

Ellipal Titan vs D’CENT! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ellipal Titan: Overview

 

This is a really unique device and has a very robust form factor that has ratings that rival that of some high-end smartphones. What separates this hardware wallet from the majority of other popular wallets is its communication method. So, what do I mean by that? This device has NO: USB Connection, NFC Connection, WiFi Connection, Bluetooth Connection, or Cellular Connection. So, how do you use it? The short answer is: QR Codes.

 

 

Ellipal Titan: Security

 

 

This is a 100% air-gapped device, so ultimately it is more secure than any other way to interact with a hardware wallet. Period. The device has a tamper-resistant enclosure that includes a self-destruct mechanism for any potential way to access the internals of the device. 

It is built in such a way that if anyone tries to break the screen or drill a hole through the device in an attempt to open its internal layout, the private keys will be erased. This is extremely powerful and will ultimately deter people from trying to hack this completely wireless device.

 

 

Ellipal Titan: User Experience (UX)

 

 

This hardware wallet has a camera, a 4-inch full color display, and does not display any balances on the device itself. The portfolio management and execution of the device is managed via a companion iOS and Android app that is used to initiate transactions and allows you to utilize the camera from your smartphone to transfer funds securely to the cold wallet, and vice versa.

I have been using this device for several weeks now, and in my personal opinion, it has been super easy to use and also very secure. I like knowing that my device is essentially indestructible and does not require any other 3rd party connection in order for it to function. This not only makes it very convenient, but it also very secure and eliminates room for error when typing or copying pasting wallet addresses that you are trying to transact with.

 

Ellipal Titan: Coin Support

 

 

This is always the section I check the most when reviewing hardware wallets, because although functionality and security are important, none of that matters unless it supports the coins you want to store offline. So here is the current list of supported coins and the one that are currently in development listed in the above picture.

 

 

D’CENT: Overview

 

 

The D’CENT is a mobile and bluetooth connected wireless hardware wallet device. With additional biometric security and the ease of use, this is a contender for the easiest to use mobile and wireless wallet. So how is it different than Ledger Nano X or other bluetooth devices? The Biometric security is a large differentiator here. It’s super convenient and makes it easy to sign and authenticate transactions on the go.

This means if you want to move your crypto from cold storage to a hot wallet, it can be done quickly and easily. A common scenario here would be if you are trying to pay a friend or you’re shopping and want to pay for a product in store very seamlessly. Let’s take a look at the security, features, and price below to go into a little more detail.

 

 

D’CENT: Security

 

 

The flagship feature of D’CENT is hands down the biometric security feature of the fingerprint sensor. There are some other hardware wallets that communicate with mobile, and can utilize Face ID or Touch ID for extra authentication with their mobile app, but this gives your authentication on the physical device as well. This is a unique and very secure feature that is not used by any other hardware wallet currently on the market.

The hardware wallet features a built-in fingerprint scanner that manages access to the hardware wallet. This security process improves the convenience for the users and enhances the security during access control. It also provides the wallet with fast transaction signing.

 

  • Multi-IC architecture design
  • Bank grade EAL 5+ Secure Element (This is the same security chip used in the Ledger Nano X)
  • Secure OS embedded on microprocessor

 

 

D’CENT: User Experience (UX)

 

 

One of the main features I like here is the option to generate a valid QR code on the large OLED screen of this device as a way to send funds directly from your smartphone to your D’CENT wallet. This is super convenient and truly makes this a wireless and independent device that can be used on the go via the D’CENT app, which also includes a market price section and of course all of your wallets and current fiat amount stored within each one.

What’s also nice is you no longer need to backup and restore this device for firmware upgrades like you do with other devices (although you can, since this device can also support bluetooth and USB connectivity if you choose). This makes this a very convenient choice when considering the ease of use and security when choosing how to secure your private keys.

 

 

D’CENT: Coin Support

 

The coin support is varied. The D’CENT can store and support: Bitcoin, Ethereum, ERC20 tokens, RSK, RRC20 (RSK tokens), Ripple (XRP), and MONACOIN. To many, this may not seem like it is very much, however, a majority of the major tokens are ERC-20 tokens and all can be supported natively on this device, which is good. I have not come across a hardware wallet yet that supports RSK and RRC20 tokens yet natively, so that definitely makes this an exclusive hardware wallet first for the D’CENT wallet!

 

 

Ellipal Titan vs D’CENT: Conclusion

 

Overall, these are two very unique wallets, even though they are both wireless. On the one hand, the D’CENT wallet is cheaper (with my current discount of $106) and has a biometric authentication via fingerprint sensor. This is extremely compelling.

On the other hand, the Ellipal Titan is completely air gapped and is transmitted through scanning QR codes on the device camera and allows for multi-factor authentication. Both are unique in my opinion and have different selling points.

At the end of the day, you need to ask yourself what coins you need to store offline, and if you prefer a large or smaller device. They are both secure in their own unique ways, but I would have to still go in favor of the ELLIPAL TITAN

You can’t beat the air-gapped security, and the user experience is much better on a larger screen, which also makes it easier to navigate and use on a regular basis. Although, if there was an under screen fingerprint sensor on future hardware wallet, that was also air-gapped and transmitted through QR codes, that would be a home run.

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

Ellipal Titan vs BC VAULT (2020) | 2 Best Hardware Wallets Out Right Now?

Ellipal Titan vs BC VAULT! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ellipal Titan: Overview

 

This is a really unique device and has a very robust form factor that has ratings that rival that of some high-end smartphones. What separates this hardware wallet from the majority of other popular wallets is it’s communication method. So, what do I mean by that? This device has NO: USB Connection, NFC Connection, WiFi Connection, Bluetooth Connection, or Cellular Connection. So, how do you use it? The short answer is: QR Codes.

 

Ellipal Titan: Security

 

 

This is a 100% air-gapped device, so ultimately it is more secure than any other way to interact with a hardware wallet. Period. The device has a tamper-resistant enclosure that includes a self-destruct mechanism for any potential way to access the internals of the device. 

It is built in such a way that if anyone tries to break the screen or drill a hole through the device in an attempt to open its internal layout, the private keys will be erased. This is extremely powerful and will ultimately deter people from trying to hack this completely wireless device.

Ellipal Titan: User Experience (UX)

 

This hardware wallet has a camera, a 4-inch full color display, and does not display any balances on the device itself. The portfolio management and execution of the device is managed via a companion iOS and Android app that is used to initiate transactions and allows you to utilize the camera from your smartphone to transfer funds securely to the cold wallet, and vice versa.

I have been using this device for several weeks now, and in my personal opinion, it has been super easy to use and also very secure. I like knowing that my device is essentially indestructible and does not require any other 3rd party connection in order for it to function. This not only makes it very convenient, but it also very secure and eliminates room for error when typing or copying pasting wallet addresses that you are trying to transact with.

 

Ellipal Titan: Coin Support

 

 

This is always the section I check the most when reviewing hardware wallets, because although functionality and security are important, none of that matters unless it supports the coins you want to store offline. So here is the current list of supported coins and the one that are currently in development listed in the below picture.

BC VAULT: Overview

 

Unlike most other popular cryptocurrency hardware wallets, like Ledger Nano X and Trezor Model T, you do not set up a recovery seed card before you initialize the device. In fact, there is a gyro sensor for you to randomly generate private keys by physically shaking the device (seriously).

You can also hold more than 2000 unique wallets within the web app, and can granularly set specific passwords for each one and setup multiple PIN’s to not only make it more secure, but also allows for an easy way to share the device and use Multi-Sig. In fact, this is the first device that natively allows you to use Multi-Sig on a per wallet basis and set multiple PIN’s.

This wallet does not use HD wallets, so each wallet has its own unique backup. This does make it more secure, however, if you lose or forget the global PIN and global password for the device, your funds are locked inside forever. They do have an encrypted QR code backup for each individual wallet, or you can create a backup on the included micro SD card that comes in the box.

 

BC VAULT: Security

 

 

The storage is reliable. The BC Vault’s private keys have complete encryption and they are stored in the FRAM device. The FRAM is fully tamper-resistant and thanks to the reversible USB 3.0 Type-C connector any damage occurring from mechanical error is fully prevented.

In addition to the secure FeRAM that is securely encrypted, and the large display which is useful when confirming transactions, you have peace of mind not having to worry about anyone locating or using a recovery seed phrase to render your funds useless.

You can also import any private keys you have elsewhere via the SD card as well, so you can easily interchange private keys from other wallets if you have them in the correct format.

BC VAULT: User Experience (UX)

 

 

This wallet has some pretty unique features I will admit, and it’s pretty refreshing. For example, you can use multiple cryptocurrencies at once. There are no “apps” you need to install or fear or worry of running out of space that most wallets have when upgrading the firmware.

Additionally, the amount of coins and wallets that can be used/stored simultaneously is astounding. As mentioned above, you can have up to 2000 unique wallets and can interchange multiple cryptos in multiple wallets.

 

BC VAULT: Coin Support

 

This is usually one of the most important factors when deciding on a hardware wallet (with the exception of security). If the wallet doesn’t currently support the coins you need to store offline, you can’t really take it too seriously as a deciding factor for purchase. Regardless of whether or not they claim to add more coins in the future.

 Needless to say, they have some unique choices for coin support HERE.

 

 

Ellipal Titan vs BC VAULT: Conclusion

 

This is a really close call. Each of these wallets have some unique features that I use for different use cases. When it comes to the BC VAULT, I can securely share this wallet with multiple people and it’s honestly the best user experience when it comes to multi-sig on a hardware wallet. Period.

When it comes to the Ellipal Titan, the completely wireless and air-gapped security is extremely compelling. It makes it very easy to use on the go, and not be tethered to a computer. The ease of use and over user experience is much improved from the last iteration of this product and I personally have been using this for long term “hodling” lately, and as a single user with no need for multi-sig on this type of device, it’s been extremely pleasant to use.

At the end of the day, these are really built for two different use cases (in my opinion), but both have great coin support and have very unique security features that set them apart from the rest of the pack. 

If I could only choose one and I didn’t specifically need multi-sig for a specific reason, I would go with the ELLIPAL TITAN. I’ve used almost every single hardware wallet on the market and the ease of use and peace of mind is enough to make me feel secure and makes it easy to send your private keys offline. You really can’t go wrong with ANY of these wallets, but just think about how you want to manage your crypto assets on a regular basis.

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

Ellipal Titan vs KeepKey (2020) | Which Hardware Wallet Has A Better UX?

Ellipal Titan vs KeepKey! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ellipal Titan: Overview

 

This is a really unique device and has a very robust form factor that has ratings that rival that of some high-end smartphones. What separates this hardware wallet from the majority of other popular wallets is its communication method. So, what do I mean by that? This device has NO: USB Connection, NFC Connection, WiFi Connection, Bluetooth Connection, or Cellular Connection. So, how do you use it? The short answer is: QR Codes.

 

Ellipal Titan: Security

 

 

This is a 100% air-gapped device, so ultimately it is more secure than any other way to interact with a hardware wallet. Period. The device has a tamper-resistant enclosure that includes a self-destruct mechanism for any potential way to access the internals of the device. 

It is built in such a way that if anyone tries to break the screen or drill a hole through to device in an attempt to open its internal layout, the private keys will be erased. This is extremely powerful and will ultimately deter people from trying to hack this completely wireless device.

Ellipal Titan: User Experience (UX)

 

This hardware wallet has a camera, a 4-inch full color display, and does not display any balances on the device itself. The portfolio management and execution of the device is managed via a companion iOS and Android app that is used to initiate transactions and allows you to utilize the camera from your smartphone to transfer funds securely to the cold wallet, and vice versa.

I have been using this device for several weeks now, and in my personal opinion, it has been super easy to use and also very secure. I like knowing that my device is essentially indestructible and does not require any other 3rd party connection in order for it to function. This not only makes it very convenient, but it also very secure and eliminates room for error when typing or copying pasting wallet addresses that you are trying to transact with.

 

Ellipal Titan: Coin Support

 

 

This is always the section I check the most when reviewing hardware wallets, because although functionality and security are important, none of that matters unless it supports the coins you want to store offline. So here is the current list of supported coins and the one that are currently in development listed in the below picture.

KeepKey: Overview

 

KeepKey has been one of my absolute favorite hardware wallets to use in 2019. I was asked to test and report back issues with the ShapeShift beta that was a complete overhaul and utilized the KeepKey as it’s cornerstone of promoting keeping possession of your private keys under your control while you conduct trades, which has never been done before.

It was an ambitious goal, but they pulled it off in spades, and as a result it resulted in one of the best user experiences while using a hardware wallet I’ve ever encountered. It was quick, safe, and makes it easier than ever to manage your assets, portfolio, and trades all while keeping all your keys on a hardware wallet and never forfeiting custody. This is truly a game-changer and will pave the way for future hardware wallets moving into the next decade.

Let’s find out why below!

 

KeepKey: Security

 

KeepKey has a true random number generator (TRNG) for it’s PIN interface for extra physical security. In addition to offline storage, KeepKey’s PIN code and number randomization makes sure that

1) Your wallet is secure from physical theft.

2) That a hacker couldn’t steal bitcoins from your wallet with malware.

KeepKey is an HD wallet, meaning your entire wallet can be backed up with the 12 words generated on setup. 12 words is the default setting, although KeepKey supports seed lengths of 18 and 24.

The seed is generated using entropy from both the device itself and the computer used for setup. The seed is generated offline on the KeepKey and displayed on the device’s screen. The device’s offline screen makes sure the seed is never displayed on an internet-connected device.

 

KeepKey: User Experience (UX)

 

 

This is a complete overhaul that includes all of their services including: Instant Trades, Real-Time Market Data via CoinCap, In-App Crypto Purchases, and KeepKey Integration. 

That last part is of particular interest to me because I’ve wanted to find a way to execute purchases and trades while having my KeepKey connected, while ensuring that my private keys are protected throughout the entire process.

This is a very important detail, especially if you want to make purchases online with that extra protection and also ensure that my private keys are never compromised in a trade. This truly is the ultimate non-custodial hardware wallet solution. Here’s a few screenshots and user flows based on my experience using this web app.

 

KeepKey: Coin Support

 

Natively, this wallet in the current beta form supports over 40 assets with more on the way! Here is a current list of assets that are supported right now.  Now let’s get into the nitty-gritty. For years, KeepKey only supported: Bitcoin, Litecoin, Ethereum, Namecoin, Dogecoin, and Dash. For a hardware wallet that needs to compete in this market place, that needed a serious upgrade.

Luckily, they have been making some AMAZING changes and not only added a ton of ERC-20 Support, but more importantly, they are revamping their entire platform to have one fluid, seamless application that integrates all of their core services (See my previous post for details on this). This is extremely powerful, and a decision that I believe will catapult them ahead of the competition. They are currently in a closed beta, and it is expected that they will be releasing this later in 2019. Stay tuned for news on this.

Some of the notable coins that have been added are:

-Chainlink (LINK)

-DigixDAO (DGD)

-Binance Coin (BNB)

-Dai (DAI)

-Maker (MKR)

-TrueUSD (TUSD)

 

 

Ellipal Titan vs KeepKey: Conclusion

 

Overall, this is a very difficult choice. These 2 wallets have been my favorite user experience of any hardware wallets in the past 2 months. However, I use them for VERY different purposes.

First, I use the KeepKey for when I want to make crypto trades and not have to send my private keys to the exchange. This is the only hardware wallet (currently) that allows you to trade and still maintain full non-custodial control throughout the entire process. As mentioned above, they completely revamped their software to include trading, portfolio management, and more.

With that said, the Ellipal Titan does allow you to trade certain coins using their QR code transfer process, but you still have to transfer your private keys to a 3rd party while the trade executes, which is pretty close, but not the same.

I use the Ellipal Titan for long term “HODLing” and the KeepKey for trading and portfolio management. There is no “wrong” choice, it ultimately depends on your trading habits and your goals. At the end of the day, I would still go with the ELLIPAL TITAN, for the reasons stated above, but the KeepKey is a VERY close second.

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

SafePal vs Ellipal Titan (2020) | Which Air-Gapped Hardware Wallet Is Better?

SafePal vs Ellipal Titan! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

SafePal: Overview

 

This device was originally created by Binance Labs division and wanted to have a unique approach to a hardware wallet that was cheap enough for the average user, but also supported the Binance chain and added support for their internal projects. This really is a unique entry level hardware wallet, that greatly differs in terms of design, functionality, and overall user experience.

SafePal: Security

 

 

This can be considered one of the most attractive features of the device as it’s only $39.99 for this hardware wallet. Yes, you read that right. But why is it so cheap? Well, even though it looks like a very sleek and expensive device, its is made of plastic coating and a very small camera module that is used to transact at a very low resolution.l It’s obvious that they built this as cheaply as they could, while still remaining secure.

This is not necessarily a bad thing, but you also get what you pay for. One of the key features that sets this device apart from most other competing hardware wallets is the fact that there is NO:

  • NFC
  • BLUETOOTH
  • USB
  • CELLULAR
  • EXTERNAL DEVICE CONNECTIONS

This gives it extra security, but it also makes it easier to use, as there are no extra devices necessary for this to operate, other than your smartphone. All you need right out of the box is a charger that supports USB-A to charge the device and a smartphone to download the SafePal App to setup and initialize the device.

 

SafePal: User Experience (UX)

 

This is the cheapest completely wireless hardware wallet on the market. It interacts only with your smartphone and the camera embedded into the device that allows you to transmit encrypted data via the QR code. This is truly a unique device.

This is a pretty solid introductory hardware wallet. It’s unique from it’s direct competitors and its simple and easy to use. As mentioned above, it has no connection weaknesses and cannot be hacked by any radio frequency or directly connected internet device. 

It’s truly a unique wireless hardware wallet that can be used on the go and is one of only a few hardware wallets that are “truly wireless” with no dependence on other devices. Oh, and did I mentioned it’s under $40?

 

SafePal: Coin Support

 

 

This is the one weak point of this product is the lack of coin support, as it only supports: Bitcoin, Ether (and ERC-20 Tokens), BNB, Litecoin, Dash, and Bitcoin Cash. However, they have mentioned that there is Ripple (XRP) and Tron (TRX) coming very shortly. They truly are attempting to add more coins, and over time, if they don’t raise their price, this option will be a slam dunk for most users.

Additionally, I will add that the Binance Chain Coins (BEP2) tokens are also supported as this is a Binance hardware wallet after all. Below Is a full list of coins currently supported.

Ellipal Titan: Overview

 

This is a really unique device and has a very robust form factor that has ratings that rival that of some high-end smartphones. What separates this hardware wallet from the majority of other popular wallets is its communication method. So, what do I mean by that? This device has NO: USB Connection, NFC Connection, WiFi Connection, Bluetooth Connection, or Cellular Connection. So, how do you use it? The short answer is: QR Codes.

 

Ellipal Titan: Security

 

 

This is a 100% air-gapped device, so ultimately it is more secure than any other way to interact with a hardware wallet. Period. The device has a tamper-resistant enclosure that includes a self-destruct mechanism for any potential way to access the internals of the device. 

It is built in such a way that if anyone tries to break the screen or drill a hole through to device in an attempt to open its internal layout, the private keys will be erased. This is extremely powerful and will ultimately deter people from trying to hack this completely wireless device.

Ellipal Titan: User Experience (UX)

 

This hardware wallet has a camera, a 4-inch full color display, and does not display any balances on the device itself. The portfolio management and execution of the device is managed via a companion iOS and Android app that is used to initiate transactions and allows you to utilize the camera from your smartphone to transfer funds securely to the cold wallet, and vice versa.

I have been using this device for several weeks now, and in my personal opinion, it has been super easy to use and also very secure. I like knowing that my device is essentially indestructible and does not require any other 3rd party connection in order for it to function. This not only makes it very convenient, but it also very secure and eliminates room for error when typing or copying pasting wallet addresses that you are trying to transact with.

 

Ellipal Titan: Coin Support

 

 

This is always the section I check the most when reviewing hardware wallets, because although functionality and security are important, none of that matters unless it supports the coins you want to store offline. So here is the current list of supported coins and the one that are currently in development listed in the above picture.

 

 

SafePal vs Ellipal Titan: Conclusion

 

Overall, these are very similar devices in many ways. They both are air-gapped. They both utilize encrypted QR codes for transmission, and they both are completely mobile and wireless. 

Having said that, these are at two opposite ends of the spectrum in terms of overall build and quality. The form factor of the SafePal is slim and nice, however it is plastic and can easily be broken and/or pried open if someone really wanted access to the internals.

The Ellipal Titan is the clear winner here, as its form factor is designed to withstand most elements and has an “anti-tampering” design that makes it almost impossible to break open. That level of quality and security against attacks (and it breaking when being dropped), is no where to be found in this class of hardware wallets. You really can’t go wrong with the Ellipal Titan, as it’s become my “go to” wallet for 2020 (so far).

 

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

SafePal vs KeepKey (2020) | Which One Would Is Better?

SafePal vs KeepKey! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

KeepKey: Overview

 

 

KeepKey has been one of my absolute favorite hardware wallets to use in 2019. I was asked to test and report back issues with the ShapeShift beta that was a complete overhaul and utilized the KeepKey as it’s cornerstone of promoting keeping possession of your private keys under your control while you conduct trades, which has never been done before.

It was an ambitious goal, but they pulled it off in spades, and as a result it resulted in one of the best user experiences while using a hardware wallet I’ve ever encountered. It was quick, safe, and makes it easier than ever to manage your assets, portfolio, and trades all while keeping all your keys on a hardware wallet and never forfeiting custody. This is truly a game-changer and will pave the way for future hardware wallets moving into the next decade.

Let’s find out why below!

 

KeepKey: Security

 

KeepKey has a true random number generator (TRNG) for it’s PIN interface for extra physical security. In addition to offline storage, KeepKey’s PIN code and number randomization makes sure that

1) Your wallet is secure from physical theft.

2) That a hacker couldn’t steal bitcoins from your wallet with malware.

KeepKey is an HD wallet, meaning your entire wallet can be backed up with the 12 words generated on setup. 12 words is the default setting, although KeepKey supports seed lengths of 18 and 24.

The seed is generated using entropy from both the device itself and the computer used for setup. The seed is generated offline on the KeepKey and displayed on the device’s screen. The device’s offline screen makes sure the seed is never displayed on an internet-connected device.

KeepKey: User Experience (UX)

 

 

This is a complete overhaul that includes all of their services including: Instant Trades, Real-Time Market Data via CoinCap, In-App Crypto Purchases, and KeepKey Integration. That last part is of particular interest to me because I’ve wanted to find a way to execute purchases and trades while having my KeepKey connected, while ensuring that my private keys are protected throughout the entire process.

This is a very important detail, especially if you want to make purchases online with that extra protection and also ensure that my private keys are never compromised in a trade. This truly is the ultimate non-custodial hardware wallet solution. Here’s a few screenshots and user flows based on my experience using this web app.

 

KeepKey: Coin Support

 

Natively, this wallet in the current beta form supports over 40 assets with more on the way! Here is a current list of assets that are supported right now.  Now let’s get into the nitty-gritty. For years, KeepKey only supported: Bitcoin, Litecoin, Ethereum, Namecoin, Dogecoin, and Dash. For a hardware wallet that needs to compete in this market place, that needed a serious upgrade.

Luckily, they have been making some AMAZING changes and not only added a ton of ERC-20 Support, but more importantly, they are revamping their entire platform to have one fluid, seamless application that integrates all of their core services (See my previous post for details on this). This is extremely powerful, and a decision that I believe will catapult them ahead of the competition. They are currently in a closed beta, and it is expected that they will be releasing this later in 2019. Stay tuned for news on this.

Some of the notable coins that have been added are:

-Chainlink (LINK)

-DigixDAO (DGD)

-Binance Coin (BNB)

-Dai (DAI)

-Maker (MKR)

-TrueUSD (TUSD)

SafePal: Overview

 

This device was originally created by Binance Labs division and wanted to have a unique approach to a hardware wallet that was cheap enough for the average user, but also supported the Binance chain and added support for their internal projects. This really is a unique entry level hardware wallet, that greatly differs in terms of design, functionality, and overall user experience.

 

SafePal: Security

 

 

This can be considered one of the most attractive features of the device as it’s only $39.99 for this hardware wallet. Yes, you read that right. But why is it so cheap? Well, even though it looks like a very sleek and expensive device, its is made of plastic coating and a very small camera module that is used to transact at a very low resolution.l It’s obvious that they built this as cheaply as they could, while still remaining secure.

This is not necessarily a bad thing, but you also get what you pay for. One of the key features that sets this device apart from most other competing hardware wallets is the fact that there is NO:

  • NFC
  • BLUETOOTH
  • USB
  • CELLULAR
  • EXTERNAL DEVICE CONNECTIONS

This gives it extra security, but it also makes it easier to use, as there are no extra devices necessary for this to operate, other than your smartphone. All you need right out of the box is a charger that supports USB-A to charge the device and a smartphone to download the Safepal App to setup and initialize the device.

SafePal: User Experience (UX)

 

This is the cheapest completely wireless hardware wallet on the market. It interacts only with your smartphone and the camera embedded into the device that allows you to transmit encrypted data via the QR code. This is truly a unique device.

This is a pretty solid introductory hardware wallet. It’s unique from it’s direct competitors and its simple and easy to use. As mentioned above, it has no connection weaknesses and cannot be hacked by any radio frequency or directly connected internet device. It’s truly a unique wireless hardware wallet that can be used on the go and is one of only a few hardware wallets that are “truly wireless” with no dependence on other devices. Oh, and did I mentioned it’s under $40?

 

SafePal: Coin Support

 

 

This is the one weak point of this product is the lack of coin support, as it only supports: Bitcoin, Ether (and ERC-20 Tokens), BNB, Litecoin, Dash, and Bitcoin Cash. However, they have mentioned that there is Ripple (XRP) and Tron (TRX) coming very shortly. They truly are attempting to add more coins, and over time, if they don’t raise their price, this option will be a slam dunk for most users.

Additionally, I will add that the Binance Chain Coins (BEP2) tokens are also supported as this is a Binance hardware wallet after all. Below Is a full list of coins currently supported.

 

SafePal vs KeepKey: Conclusion

 

Overall, these are two of the cheapest (as of this writing) hardware wallets you can get right now, with quality security propositions. With the KeepKey, you can for the first time trade your crypto non-custodially and manage your portfolio without ever handing over your private keys. This is the first of its kind.

With the SafePal, you are 100% air-gapped and there is no way to intercept the transmission, because there are no signals. Because everything is transmitted through QR codes, you know that you’re completely off the grid.

In the end, it really depends on what your crypto goals are. If you are someone who likes to trade, I would go with the KeepKey, hands down. Being able to trade and manage your portfolio while maintaining full possession of your private keys is extremely compelling. 

If you only want to hold, say, BTC, LTC, and ETH, I would go with the SafePal. It’s simple to use with a mobile device and you don’t have to worry about ever mistyping a wallet address, as the QR code ensures that you never miss a beat when transacting. If I had to choose, I’d still go with KeepKey. Even though it’s not wireless, it provides a full portfolio management platform that covers all the bases for any seasoned or new crypto user.

 

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

SafePal vs BC VAULT (2020) | Which Wallet Is More Secure?

SafePal vs BC VAULT! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

BC VAULT: Overview

 

 

Unlike most other popular cryptocurrency hardware wallets, like Ledger Nano X and Trezor Model T, you do not set up a recovery seed card before you initialize the device. In fact, there is a gyro sensor for you to randomly generate private keys by physically shaking the device (seriously).

You can also hold more than 2000 unique wallets within the web app, and can granularly set specific passwords for each one and setup multiple PIN’s to not only make it more secure, but also allows for an easy way to share the device and use Multi-Sig. In fact, this is the first device that natively allows you to use Multi-Sig on a per wallet basis and set multiple PIN’s.

This wallet does not use HD wallets, so each wallet has its own unique backup. This does make it more secure, however, if you lose or forget the global PIN and global password for the device, your funds are locked inside forever. They do have an encrypted QR code backup for each individual wallet, or you can create a backup on the included micro SD card that comes in the box.

 

BC VAULT: Security

 

The storage is reliable. The BC Vault’s private keys have complete encryption and they are stored in the FRAM device. The FRAM is fully tamper-resistant and thanks to the reversible USB 3.0 Type-C connector any damage occurring from mechanical error is fully prevented.

In addition to the secure FeRAM that is securely encrypted, and the large display which is useful when confirming transactions, you have peace of mind not having to worry about anyone locating or using a recovery seed phrase to render your funds useless.

You can also import any private keys you have elsewhere via the SD card as well, so you can easily interchange private keys from other wallets if you have them in the correct format.

BC VAULT: User Experience (UX)

 

 

This wallet has some pretty unique features I will admit, and it’s pretty refreshing. For example, you can use multiple cryptocurrencies at once. There are no “apps” you need to install or fear or worry of running out of space that most wallets have when upgrading the firmware.

Additionally, the amount of coins and wallets that can be used/stored simultaneously is astounding. As mentioned above, you can have up to 2000 unique wallets and can interchange multiple cryptos in multiple wallets.

 

BC VAULT: Coin Support

 

This is usually one of the most important factors when deciding on a hardware wallet (with the exception of security). If the wallet doesn’t currently support the coins you need to store offline, you can’t really take it too seriously as a deciding factor for purchase. Regardless of whether or not they claim to add more coins in the future.

 Needless to say, they have some unique choices for coin support HERE.

SafePal: Overview

 

This device was originally created by Binance Labs division and wanted to have a unique approach to a hardware wallet that was cheap enough for the average user, but also supported the Binance chain and added support for their internal projects. This really is a unique entry level hardware wallet, that greatly differs in terms of design, functionality, and overall user experience.

 

SafePal: Security

 

 

This can be considered one of the most attractive features of the device as it’s only $39.99 for this hardware wallet. Yes, you read that right. But why is it so cheap? Well, even though it looks like a very sleek and expensive device, its is made of plastic coating and a very small camera module that is used to transact at a very low resolution.l It’s obvious that they built this as cheaply as they could, while still remaining secure.

This is not necessarily a bad thing, but you also get what you pay for. One of the key features that sets this device apart from most other competing hardware wallets is the fact that there is NO:

  • NFC
  • BLUETOOTH
  • USB
  • CELLULAR
  • EXTERNAL DEVICE CONNECTIONS

This gives it extra security, but it also makes it easier to use, as there are no extra devices necessary for this to operate, other than your smartphone. All you need right out of the box is a charger that supports USB-A to charge the device and a smartphone to download the Safepal App to setup and initialize the device.

SafePal: User Experience (UX)

 

This is the cheapest completely wireless hardware wallet on the market. It interacts only with your smartphone and the camera embedded into the device that allows you to transmit encrypted data via the QR code. This is truly a unique device.

This is a pretty solid introductory hardware wallet. It’s unique from it’s direct competitors and its simple and easy to use. As mentioned above, it has no connection weaknesses and cannot be hacked by any radio frequency or directly connected internet device. It’s truly a unique wireless hardware wallet that can be used on the go and is one of only a few hardware wallets that are “truly wireless” with no dependence on other devices. Oh, and did I mentioned it’s under $40?

 

SafePal: Coin Support

 

 

This is the one weak point of this product is the lack of coin support, as it only supports: Bitcoin, Ether (and ERC-20 Tokens), BNB, Litecoin, Dash, and Bitcoin Cash. However, they have mentioned that there is Ripple (XRP) and Tron (TRX) coming very shortly. They truly are attempting to add more coins, and over time, if they don’t raise their price, this option will be a slam dunk for most users.

Additionally, I will add that the Binance Chain Coins (BEP2) tokens are also supported as this is a Binance hardware wallet after all. Below Is a full list of coins currently supported.

 

SafePal vs BC VAULT: Conclusion

 

Overall, these are two very unique wallets at two ends of the spectrum in terms of quality, price, and overall usability. On the one hand, the SafePal is an entry level device which you can get for under $40 and is completely air-gapped and wireless. It doesn’t hold that many coins yet, but it will slowly add more coin support over time.

The BC VAULT is more of an advanced user wallet, that not only supports multiple wallets, but can securely share wallets with multi-sig and also securely share it among family and friends. This is a very robust wallet offering and the easiest one to use with multi-sig, which is inherently more secure.

You can’t really go wrong with either of these wallets, but I would have to say the BC VAULT is going to be my choice here. It holds hundreds of more coins and have a very easy to use UI. Yes, this is NOT a wireless device, but its robust security features and vast coin support easily make up for its usability factor. I absolutely feel that this device is going to allow me to securely store all of my private keys offline, especially with shared wallets.

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

D’CENT vs SafePal (2020) | Which Wireless Hardware Wallet Is Better?

D’CENT vs SafePal! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these bluetooth hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making a such an important decision, such as choosing a cryptocurrency hardware wallet.

 

SafePal: Overview

 

This device was originally created by Binance Labs division and wanted to have a unique approach to a hardware wallet that was cheap enough for the average user, but also supported the Binance chain and added support for their internal projects. This really is a unique entry level hardware wallet, that greatly differs in terms of design, functionality, and overall user experience.

 

 

SafePal: Security

 

 

This can be considered one of the most attractive features of the device as it’s only $39.99 for this hardware wallet. Yes, you read that right. But why is it so cheap? Well, even though it looks like a very sleek and expensive device, its is made of plastic coating and a very small camera module that is used to transact at a very low resolution.l It’s obvious that they built this as cheaply as they could, while still remaining secure.

This is not necessarily a bad thing, but you also get what you pay for. One of the key features that sets this device apart from most other competing hardware wallets is the fact that there is NO:

  • NFC
  • BLUETOOTH
  • USB
  • CELLULAR
  • EXTERNAL DEVICE CONNECTIONS

This gives it extra security, but it also makes it easier to use, as there are no extra devices necessary for this to operate, other than your smartphone. All you need right out of the box is a charger that supports USB-A to charge the device and a smartphone to download the Safepal App to setup and initialize the device.

SafePal: User Experience (UX)

 

This is the cheapest completely wireless hardware wallet on the market. It interacts only with your smartphone and the camera embedded into the device that allows you to transmit encrypted data via the QR code. This is truly a unique device.

This is a pretty solid introductory hardware wallet. It’s unique from it’s direct competitors and its simple and easy to use. As mentioned above, it has no connection weaknesses and cannot be hacked by any radio frequency or directly connected internet device. It’s truly a unique wireless hardware wallet that can be used on the go and is one of only a few hardware wallets that are “truly wireless” with no dependence on other devices. Oh, and did I mentioned it’s under $40?

 

SafePal: Coin Support

 

 

This is the one weak point of this product is the lack of coin support, as it only supports: Bitcoin, Ether (and ERC-20 Tokens), BNB, Litecoin, Dash, and Bitcoin Cash, DigiByte (DGB), NEO, and Zcash (ZEC) . However, they have mentioned that there is Ripple (XRP) and Tron (TRX) coming very shortly. They truly are attempting to add more coins, and over time, if they don’t raise their price, this option will be a slam dunk for most users.

Additionally, I will add that the Binance Chain Coins (BEP2) tokens are also supported as this is a Binance hardware wallet after all. Below Is a full list of coins currently supported.

D’CENT: Overview

 

The D’CENT is a mobile and bluetooth connected wireless hardware wallet device. With additional biometric security and the ease of use, this is a contender for the easiest to use mobile and wireless wallet. So how is it different than Ledger Nano X or other bluetooth devices? The Biometric security is a large differentiator here. It’s super convenient and makes it easy to sign and authenticate transactions on the go.

This means if you want to move your crypto from cold storage to a hot wallet, it can be done quickly and easily. A common scenario here would be if you are trying to pay a friend or you’re shopping and want to pay for a product in store very seamlessly. Let’s take a look at the security, features, and price below to go into a little more detail.

 

D’CENT: Security

 

 

The flagship feature of D’CENT is hands down the biometric security feature of the fingerprint sensor. There are some other hardware wallets that communicate with mobile, and can utilize Face ID or Touch ID for extra authentication with their mobile app, but this gives your authentication on the physical device as well. This is a unique and very secure feature that is not used by any other hardware wallet currently on the market.

The hardware wallet features a built-in fingerprint scanner that manages access to the hardware wallet. This security process improves the convenience for the users and enhances the security during access control. It also provides the wallet with fast transaction signing.

 

  • Multi-IC architecture design
  • Bank grade EAL 5+ Secure Element (This is the same security chip used in the Ledger Nano X)
  • Secure OS embedded on microprocessor

 

D’CENT: User Experience (UX)

 

 

One of the main features I like here is the option to generate a valid QR code on the large OLED screen of this device as a way to send funds directly from your smartphone to your D’CENT wallet. This is super convenient and truly makes this a wireless and independent device that can be used on the go via the D’CENT app, which also includes a market price section and of course all of your wallets and current fiat amount stored within each one.

What’s also nice is you no longer need to backup and restore this device for firmware upgrades like you do with other devices (although you can, since this device can also support bluetooth and USB connectivity if you choose). This makes this a very convenient choice when considering the ease of use and security when choosing how to secure your private keys.

 

D’CENT: Coin Support

 

The coin support is varied. The D’CENT can store and support Bitcoin, Ethereum, ERC20 tokens, RSK, RRC20 (RSK tokens), Ripple (XRP), and MONACOIN. To many, this may not seem like it is very much, however, a majority of the major tokens are ERC-20 tokens and all can be supported natively on this device, which is good. I have not come across a hardware wallet yet that supports RSK and RRC20 tokens yet natively, so that definitely makes this an exclusive hardware wallet first for the D’CENT wallet!

 

 

D’CENT vs SafePal: Conclusion

 

Overall, these are two of the most interesting wallets out there. On the one hand, the SafePal is embracing the QR code level security of an entry level wallet, but is lacking in its overall coin support. I do expect this to change over time and expand their offerings as they begin to gain market share.

On the other hand, the D’CENT is the only hardware wallet that offers biometric securirty (by use of your thumbprint) as an extra layer of security for signing and authorizing transactions. This is nice in knowing that no one can process any transactions, even if they know your password and/or PIN code. 

The D’CENT is also lacking (in comparison to other mainstream hardware wallets) in terms of coin support, but supports the RSK chain (Bitcoin Side-Chain) that is unique to this wallet and will still support all the main coins you get on every other hardware wallet.

At the end of the day, I would go with the SafePal. It’s currently under $40 and has air-gapped technology and is a completely wireless device that doesn’t require you to connect to a computer to manage your crypto assets. That’s not to say the D’CENT is bad, I just would rather spend less and get what some could construe as a better security model, even though its current coin support leaves much to be desired.

 

 

 

What do you think? Would you choose the D’CENT over the SafePal? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

Secux V20 vs Ledger Nano X (2020) | Does Ledger Have Some Bluetooth Competition?

Secux V20 vs Ledger Nano X! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these bluetooth hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ledger Nano X: Overview

 

The Nano X comes beautifully packaged with the device itself, a USB-C cable, a set of instructions and recovery seed cards. The previous bulky buttons that were on top of the device are now seamlessly integrated on it in a way that’s even a bit hard to notice. All in all a beautiful design. The primary features of this device are the bluetooth connection which allows you to manage this device using your smartphone via the iOS and Android app.

Additionally, you can now hodl, store, or manage up to 100 cryptos simultaneously, all without access to your desktop or laptop computer. This is easily it’s best new features, but aside from the upgraded storage capacity and the wireless connectivity, the device itself is now larger, has an integrated 2-function button, and an overall larger screen for verifying transactions. With a trusted device and a more universal charging cable, this makes it much more compelling to spend the extra money to store more coins and one that you can easily take with you as you travel.

 

 

Ledger Nano X: Security

 

 

Ledger is at the forefront of developing the industry’s device security. How? And in what ways?

CC EAL5+ SECURE ELEMENT

Only Ledger’s devices can claim the French cybersecurity agency ANSSI’s full certification.

The Nano X and Nano S both feature what is called a ‘secure element’. The chip seen below is the next generation chip that comes in the Nano X:

The secure chip meets the CC EAL5+ certification and run’s Ledger’s proprietary BOLOS operating system. 

 

According to Ledger:

A Secure Element is a secure chip that…embeds intrinsic countermeasures against many known attacks. This kind of chip is tamper-resistant and protects your device to a range of different attacks.”

 

Ledger Nano X: User Experience (UX)

 

Honestly, the user experience is a massive upgrade from the Ledger Nano S. With that said, It has a few usability issues that I find to be quite difficult to overcome. Although this device is physically larger than it’s predecessor, it still has a fairly difficult to use early experience.

For example, the screen is still fairly small and still cannot accommodate a QR code for scanning. This may not seem like a big deal, but after using several hardware wallets, it really does make a big difference. Using a QR code is not only safer (because it removes the chance of error from manually typing in a wallet address), but it is incredibly faster and makes the entire of transacting offline, a much easier experience. 

Although this device has stepped up the quality considerably from it’s latest iteration, I still feel that utilizing an all new form factor could have been beneficial and a little more innovative than replicating their 1st generation device with a few small tweaks.

 

 

Ledger Nano X: Coin Support

 

 

The Ledger Nano X utilizes the “Ledger Live” dashboard which is a desktop application that allows you to manage all of your coins, portfolio, and potential trades in an easy to use application. You can use this on both an iOS or Android app as well as a desktop.

This app allows you to manage up to 1,100 coins that are supported by the device. However, only about 200 of them are “native” apps. This means that you can manage them directly within the Ledger Live app, without having to connect to a 3rd party wallet, such as MyEtherWallet or MyCrypto. I will leave a link HERE with a list of fully supported coins.

 

Secux V20: Overview

 

 

After unboxing and looking at the SecuX V20 device, I was pleasantly surprised that the overall quality and screen size was much larger than other mid-tier devices in this price range, such as the Ledger Nano X and the Trezor Model T. Now, those devices are classic and original devices, but they are tiny and made of a somewhat flimsy, plastic form-factor.

This device has a beautiful brushed aluminum reinforced hardware wallet. It has a clean flat display and the back has a durable padding rubber-like backing that is built for abuse and stability. I would have no qualms with dropping this device as it’s built very solidly and feels heavy in your hand, unlike their entry-level devices. The SecuX V20 has only one MicroUSB port and one button for activating the device and for 2FA. 

The SecuX V20 device is the only one with a unique form factor and octagon design that is very sleek and very durable. This device is connected by bluetooth! That means it has wireless support and can be managed with full functionality by the SecuX app for iOS and Android. It also has a USB cable, so it can be managed online with a web wallet as well, hence, why it’s considered a “Cross-Platform” device.

The unique and notable coins that are natively supported on these devices is Groestlcoin (GRS) and Ripple (XRP). Not many hardware wallets support these coins natively, however, almost all hardware wallets support an array of ERC-20 tokens and your main-stream coins, like BTC and ETH.

 

 

Secux V20: Security

 

 

The SecuX V20  is placed with a CC EAL 5+ Certified Security Element (SE) which always ensures that stored private keys, as well as the device PIN code, are perfectly protected against any form of attack. Other significant security features include:

 

  • Pre-installed tamper-resistant firmware as well as an upgrade system
  • Physical confirmation for every transaction
  • A one-time password or custom PIN code for controlling device access or the wallet apps
  • Anti-tamper packaging
  • Randomized digital keyboard for preventing consequences of keystrokes

 

Also, the wallet complies with the BIP32, BIP39 and BIP44 standards which allow the user to generate passwords of 12, 18 and 24 words for funds recovery.

 

 

Secux V20: User Experience (UX)

 

 

The picture below showcases the key features of this device, is the “Cross-Platform Support”, which means it can be managed via desktop, laptop, and mobile. Now, as I mentioned this device CAN conduct transactions via the mobile app, but also the Secux W20 can too, as they are bluetooth enabled. 

This truly is one of the first multiple platform devices that you can manage on the big desktop screen, as well as wirelessly on the go. It has a 600mAH battery which can be charged from an empty battery within 30 minutes on the second charge

 

 

Secux V20: Coin Support

 

This is usually the most important factor when considering the hardware that you choose. This top-tier wallet from SecuX has support for the following coins as of this writing: BTC, ETH, XRP, BCH, GRS and LTC. It also supports all ERC-20 tokens as well.

Luckily, they update the firmware frequently and they plan on adding more coins as well in the near future. If you are new to “HODLing” and you do not need any specific coins outside of these top market cap coins and ERC-20 Ethereum-based tokens to start, then this is a good option.

 

 

Secux V20 vs Ledger Nano X: Conclusion

 

Overall, the SecuX V20 is a robust, and very secure wallet. For the price point, features and capabilities, the only thing that is comparable is the Ledger Nano X, which is also a bluetooth and wireless crypto wallet using the same security chip.

With the Ledger Nano X, it comes in a little cheaper at $119, and it also allows you to hold 100 apps (or different cryptocurrencies simultaneously), but it comes in a cheap and somewhat flimsy plastic enclosure that has a very tiny screen. Personally, I prefer a larger display and I’ve used almost all (if not all) hardware wallets out there, and confirming the address you’re sending to is MUCH easier to do on a large, bright, full color display. Additionally, this device has QR code support, which makes it easier when sending funds from a mobile wallet directly to your hardware wallet.

The one thing I did NOT like about the SecuX V20 is the lack of coin support with only 6 coins supported natively, and a handful of more coins to be supported in the future. If you plan on only “HODLing” the top 5 market-cap coins and perhaps a few ERC-20 tokens, I would probably say this is a better option and has a much cleaner and larger display for managing and verifying transactions.

With my discount, (Code: BITCOINLOCKUP), it will take the price to around $134 and free shipping. When compared to other entry level wallets, you can’t beat the sturdiness and large screen (which is more important than you think), when managing your assets offline.

 

 

What do you think? Would you choose the Secux V20 over the Ledger Nano X? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

BC VAULT vs KeepKey (2020) | How Important Is Multi-Sig, Really?

BC VAULT vs KeepKey! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

BC VAULT: Overview

 

Unlike most other popular cryptocurrency hardware wallets, like Ledger Nano X and Trezor Model T, you do not set up a recovery seed card before you initialize the device. In fact, there is a gyro sensor for you to randomly generate private keys by physically shaking the device (seriously).

You can also hold more than 2000 unique wallets within the web app, and can granularly set specific passwords for each one and setup multiple PIN’s to not only make it more secure, but also allows for an easy way to share the device and use Multi-Sig. In fact, this is the first device that natively allows you to use Multi-Sig on a per wallet basis and set multiple PIN’s.

This wallet does not use HD wallets, so each wallet has its own unique backup. This does make it more secure, however, if you lose or forget the global PIN and global password for the device, your funds are locked inside forever. They do have an encrypted QR code backup for each individual wallet, or you can create a backup on the included micro SD card that comes in the box.

 

BC VAULT: Security

 

 

The storage is reliable. The BC Vault’s private keys have complete encryption and they are stored in the FRAM device. The FRAM is fully tamper-resistant and thanks to the reversible USB 3.0 Type-C connector any damage occurring from mechanical error is fully prevented.

In addition to the secure FeRAM that is securely encrypted, and the large display which is useful when confirming transactions, you have peace of mind not having to worry about anyone locating or using a recovery seed phrase to render your funds useless.

You can also import any private keys you have elsewhere via the SD card as well, so you can easily interchange private keys from other wallets if you have them in the correct format.

BC VAULT: User Experience (UX)

 

 

This wallet has some pretty unique features I will admit, and it’s pretty refreshing. For example, you can use multiple cryptocurrencies at once. There are no “apps” you need to install or fear or worry of running out of space that most wallets have when upgrading the firmware.

Additionally, the amount of coins and wallets that can be used/stored simultaneously is astounding. As mentioned above, you can have up to 2000 unique wallets and can interchange multiple cryptos in multiple wallets.

 

BC VAULT: Coin Support

 

This is usually one of the most important factors when deciding on a hardware wallet (with the exception of security). If the wallet doesn’t currently support the coins you need to store offline, you can’t really take it too seriously as a deciding factor for purchase. Regardless of whether or not they claim to add more coins in the future.

 Needless to say, they have some unique choices for coin support HERE.

KeepKey: Overview

 

Shapeshift And Trezor

 

KeepKey has been one of my absolute favorite hardware wallets to use in 2019. I was asked to test and report back issues with the ShapeShift beta that was a complete overhaul and utilized the KeepKey as it’s cornerstone of promoting keeping possession of your private keys under your control while you conduct trades, which has never been done before.

It was an ambitious goal, but they pulled it off in spades, and as a result it resulted in one of the best user experiences while using a hardware wallet I’ve ever encountered. It was quick, safe, and makes it easier than ever to manage your assets, portfolio, and trades all while keeping all your keys on a hardware wallet and never forfeiting custody. This is truly a game-changer and will pave the way for future hardware wallets moving into the next decade.

Let’s find out why below!

 

KeepKey: Security

 

KeepKey has a true random number generator (TRNG) for it’s PIN interface for extra physical security. In addition to offline storage, KeepKey’s PIN code and number randomization makes sure that

1) Your wallet is secure from physical theft.

2) That a hacker couldn’t steal bitcoins from your wallet with malware.

 

KeepKey is an HD wallet, meaning your entire wallet can be backed up with the 12 words generated on setup. 12 words is the default setting, although KeepKey supports seed lengths of 18 and 24.

The seed is generated using entropy from both the device itself and the computer used for setup. The seed is generated offline on the KeepKey and displayed on the device’s screen. The device’s offline screen makes sure the seed is never displayed on an internet-connected device.

KeepKey: User Experience (UX)

 

shapeshift & trezorw,

 

This is a complete overhaul that includes all of their services including: Instant Trades, Real-Time Market Data via CoinCap, In-App Crypto Purchases, and KeepKey Integration. That last part is of particular interest to me because I’ve wanted to find a way to execute purchases and trades while having my KeepKey connected, while ensuring that my private keys are protected throughout the entire process.

This is a very important detail, especially if you want to make purchases online with that extra protection and also ensure that my private keys are never compromised in a trade. This truly is the ultimate non-custodial hardware wallet solution. Here’s a few screenshots and user flows based on my experience using this web app.

 

KeepKey: Coin Support

Natively, this wallet in the current form supports over 40 assets with more on the way! Here is a current list of assets that are supported right now.  Now let’s get into the nitty-gritty. For years, KeepKey only supported: Bitcoin, Litecoin, Ethereum, Namecoin, Dogecoin, and Dash. For a hardware wallet that needs to compete in this market place, that needed a serious upgrade.

Luckily, they have been making some AMAZING changes and not only added a ton of ERC-20 Support, but more importantly, they are revamping their entire platform to have one fluid, seamless application that integrates all of their core services (See my previous post for details on this). This is extremely powerful, and a decision that I believe will catapult them ahead of the competition. They are currently in a closed beta, and it is expected that they will be releasing this later in 2019. Stay tuned for news on this.

Some of the notable coins that have been added are:

-Chainlink (LINK)

-DigixDAO (DGD)

-Binance Coin (BNB)

-Dai (DAI)

-Maker (MKR)

-TrueUSD (TUSD)

 

 

BC VAULT vs KeepKey: Conclusion

 

Honestly, this is a tough one. My experience has been extremely pleasant when using both of these hardware wallets and I use them both for different coins and different use cases. Having said that, I enjoy the trading and portfolio experience on the KeepKey better.

The BC Vault is a VERY unique and robust wallet, especially if you want to secure share this hardware wallet with multiple people and want to use multi-sig to have shared wallets with multiple “voters” required in order to spend a transaction.

As of the time of this writing, you can can get a Keepkey for under $50 during this holiday season special and comes in multiple colors, so you will get a high quality device that is easy to use and uniquely allows you to trade your assets without ever releasing custody of your private keys.

This is a VERY big deal, and has not been done yet on any other hardware wallet. Although, Shapeshift has recently added some limited support for Trezor and Ledger Nano S.

All this to say, if you want a robust “vault” that is very intricate and allows for multiple users to use it safely, go with the BC VAULT. If you like to trade and want a very user friendly way to manage your portfolio, you can’t go wrong with the KeepKey.

 

 

BC VAULT vs Keepkey! What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

BC VAULT vs D’CENT (2020) | Which New Hardware Wallet Is Better?

BC VAULT vs D’CENT! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

BC VAULT: Overview

 

Unlike most other popular cryptocurrency hardware wallets, like Ledger Nano X and Trezor Model T, you do not set up a recovery seed card before you initialize the device. In fact, there is a gyro sensor for you to randomly generate private keys by physically shaking the device (seriously).

You can also hold more than 2000 unique wallets within the web app, and can granularly set specific passwords for each one and setup multiple PIN’s to not only make it more secure, but also allows for an easy way to share the device and use Multi-Sig. In fact, this is the first device that natively allows you to use Multi-Sig on a per wallet basis and set multiple PIN’s.

This wallet does not use HD wallets, so each wallet has its own unique backup. This does make it more secure, however, if you lose or forget the global PIN and global password for the device, your funds are locked inside forever. They do have an encrypted QR code backup for each individual wallet, or you can create a backup on the included micro SD card that comes in the box.

 

 

BC VAULT: Security

 

 

The storage is reliable. The BC Vault’s private keys have complete encryption and they are stored in the FRAM device. The FRAM is fully tamper-resistant and thanks to the reversible USB 3.0 Type-C connector any damage occurring from mechanical error is fully prevented.

In addition to the secure FeRAM that is securely encrypted, and the large display which is useful when confirming transactions, you have peace of mind not having to worry about anyone locating or using a recovery seed phrase to render your funds useless.

You can also import any private keys you have elsewhere via the SD card as well, so you can easily interchange private keys from other wallets if you have them in the correct format.

 

BC VAULT: User Experience (UX)

 

 

This wallet has some pretty unique features I will admit, and it’s pretty refreshing. For example, you can use multiple cryptocurrencies at once. There are no “apps” you need to install or fear or worry of running out of space that most wallets have when upgrading the firmware.

Additionally, the amount of coins and wallets that can be used/stored simultaneously is astounding. As mentioned above, you can have up to 2000 unique wallets and can interchange multiple cryptos in multiple wallets.

 

 

BC VAULT: Coin Support

 

This is usually one of the most important factors when deciding on a hardware wallet (with the exception of security). If the wallet doesn’t currently support the coins you need to store offline, you can’t really take it too seriously as a deciding factor for purchase. Regardless of whether or not they claim to add more coins in the future.

 Needless to say, they have some unique choices for coin support HERE.

 

D’CENT: Overview

 

The D’CENT is a mobile and bluetooth connected wireless hardware wallet device. With additional biometric security and the ease of use, this is a contender for the easiest to use mobile and wireless wallet. So how is it different than Ledger Nano X or other bluetooth devices? The Biometric security is a large differentiator here. It’s super convenient and makes it easy to sign and authenticate transactions on the go.

This means if you want to move your crypto from cold storage to a hot wallet, it can be done quickly and easily. A common scenario here would be if you are trying to pay a friend or you’re shopping and want to pay for a product in store very seamlessly. Let’s take a look at the security, features, and price below to go into a little more detail.

 

 

D’CENT: Security

 

 

The flagship feature of D’CENT is hands down the biometric security feature of the fingerprint sensor. There are some other hardware wallets that communicate with mobile, and can utilize Face ID or Touch ID for extra authentication with their mobile app, but this gives your authentication on the physical device as well. This is a unique and very secure feature that is not used by any other hardware wallet currently on the market.

The hardware wallet features a built-in fingerprint scanner that manages access to the hardware wallet. This security process improves the convenience for the users and enhances the security during access control. It also provides the wallet with fast transaction signing.

  • Multi-IC architecture design
  • Bank grade EAL 5+ Secure Element (This is the same security chip used in the Ledger Nano X)
  • Secure OS embedded on microprocessor

 

D’CENT: User Experience (UX)

 

 

One of the main features I like here is the option to generate a valid QR code on the large OLED screen of this device as a way to send funds directly from your smartphone to your D’CENT wallet. This is super convenient and truly makes this a wireless and independent device that can be used on the go via the D’CENT app, which also includes a market price section and of course all of your wallets and current fiat amount stored within each one.

What’s also nice is you no longer need to backup and restore this device for firmware upgrades like you do with other devices (although you can, since this device can also support bluetooth and USB connectivity if you choose). This makes this a very convenient choice when considering the ease of use and security when choosing how to secure your private keys.

 

 

D’CENT: Coin Support

 

The coin support is varied. The D’CENT can store and support Bitcoin, Ethereum, ERC20 tokens, RSK, RRC20 (RSK tokens), Ripple (XRP), and MONACOIN. To many, this may not seem like it is very much, however, a majority of the major tokens are ERC-20 tokens and all can be supported natively on this device, which is good. I have not come across a hardware wallet yet that supports RSK and RRC20 tokens yet natively, so that definitely makes this an exclusive hardware wallet first for the D’CENT wallet!

 

BC VAULT vs D’CENT: Conclusion

 

Overall, these are two of the most unique wallets I’ve ever used. The biometric fingerprint sensor that the D’CENT has, with the flexibility of bluetooth feature for both mobile and desktop support is a nice selling point. The coin support is not that robust (yet), but I believe in time it will be competing amongst the best. 

Not to mention, with my discount offered below via my partnership with them, you can get this wallet for only $106, which does make it cheaper than the BC Vault.

With that said, the BC VAULT has a very clean UI and user experience, and uniquely supports over 2000 different wallets and allows for very easy-to-use multiple signatures is a VERY secure feature you don’t see easily used on most other hardware wallets.

If I had a gun to my head and had to pick which one of these wallets I had to pick, I would go with the BC VAULT, it’s far more unique and having multi-sig is a very useful and secure feature, although I really do like the biometric authentication with the D’CENT. BC VAULT wins this round.

 

 

What do you think? Would you choose the BC VAULT over the D’CENT Wallet? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

BC VAULT vs Ledger Nano X (2020) | Are These Hardware Wallets Worth It?

BC VAULT vs Ledger Nano X! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ledger Nano X: Overview

 

The Nano X comes beautifully packaged with the device itself, a USB-C cable, a set of instructions and recovery seed cards. The previous bulky buttons that were on top of the device are now seamlessly integrated on it in a way that’s even a bit hard to notice. All in all a beautiful design. The primary features of this device are the bluetooth connection which allows you to manage this device using your smartphone via the iOS and Android app.

Additionally, you can now hodl, store, or manage up to 100 cryptos simultaneously, all without access to your desktop or laptop computer. This is easily it’s best new features, but aside from the upgraded storage capacity and the wireless connectivity, the device itself is now larger, has an integrated 2-function button, and an overall larger screen for verifying transactions. With a trusted device and a more universal charging cable, this makes it much more compelling to spend the extra money to store more coins and one that you can easily take with you as you travel.

 

 

Ledger Nano X: Security

 

 

Ledger is at the forefront of developing the industry’s device security. How? And in what ways?

CC EAL5+ SECURE ELEMENT

 Only Ledger’s devices can claim the French cybersecurity agency ANSSI’s full certification.

The Nano X and Nano S both feature what is called a ‘secure element’. The chip seen below is the next generation chip that comes in the Nano X:

The secure chip meets the CC EAL5+ certification and run’s Ledger’s proprietary BOLOS operating system. 

 

According to Ledger:

A Secure Element is a secure chip that…embeds intrinsic countermeasures against many known attacks. This kind of chip is tamper-resistant and protects your device to a range of different attacks.”

 

Ledger Nano X: User Experience (UX)

 

ledger nano x

 

Honestly, the user experience is a massive upgrade from the Ledger Nano S. With that said, It has a few usability issues that I find to be quite difficult to overcome. Although this device is physically larger than it’s predecessor, it still has a fairly difficult to use early experience.

For example, the screen is still fairly small and still cannot accommodate a QR code for scanning. This may not seem like a big deal, but after using several hardware wallets, it really does make a big difference. Using a QR code is not only safer (because it removes the chance of error from manually typing in a wallet address), but it is incredibly faster and makes the entire of transacting offline, a much easier experience. 

Although this device has stepped up the quality considerably from it’s latest iteration, I still feel that utilizing an all new form factor could have been beneficial and a little more innovative than replicating their 1st generation device with a few small tweaks.

 

 

Ledger Nano X Coin Support

 

The Ledger Nano X utilizes the “Ledger Live” dashboard which is a desktop application that allows you to manage all of your coins, portfolio, and potential trades in an easy to use application. You can use this on both an iOS or Android app as well as a desktop.

This app allows you to manage up to 1,100 coins that are supported by the device. However, only about 200 of them are “native” apps. This means that you can manage them directly within the Ledger Live app, without having to connect to a 3rd party wallet, such as MyEtherWallet or MyCrypto. I will leave a link HERE with a list of fully supported coins.

 

BC VAULT: Overview

 

 

Unlike most other popular cryptocurrency hardware wallets, like Ledger Nano X and Trezor Model T, you do not set up a recovery seed card before you initialize the device. In fact, there is a gyro sensor for you to randomly generate private keys by physically shaking the device (seriously).

You can also hold more than 2000 unique wallets within the web app, and can granularly set specific passwords for each one and setup multiple PIN’s to not only make it more secure, but also allows for an easy way to share the device and use Multi-Sig. In fact, this is the first device that natively allows you to use Multi-Sig on a per wallet basis and set multiple PIN’s.

This wallet does not use HD wallets, so each wallet has its own unique backup. This does make it more secure, however, if you lose or forget the global PIN and global password for the device, your funds are locked inside forever. They do have an encrypted QR code backup for each individual wallet, or you can create a backup on the included micro SD card that comes in the box.

 

 

BC VAULT: Security

 

The storage is reliable. The BC Vault’s private keys have complete encryption and they are stored in the FRAM device. The FRAM is fully tamper-resistant and thanks to the reversible USB 3.0 Type-C connector any damage occurring from mechanical error is fully prevented.

In addition to the secure FeRAM that is securely encrypted, and the large display which is useful when confirming transactions, you have peace of mind not having to worry about anyone locating or using a recovery seed phrase to render your funds useless.

You can also import any private keys you have elsewhere via the SD card as well, so you can easily interchange private keys from other wallets if you have them in the correct format.

 

BC VAULT: User Experience (UX)

 

 

This wallet has some pretty unique features I will admit, and it’s pretty refreshing. For example, you can use multiple cryptocurrencies at once. There are no “apps” you need to install or fear or worry of running out of space that most wallets have when upgrading the firmware.

Additionally, the amount of coins and wallets that can be used/stored simultaneously is astounding. As mentioned above, you can have up to 2000 unique wallets and can interchange multiple cryptos in multiple wallets.

 

 

BC VAULT: Coin Support

 

This is usually one of the most important factors when deciding on a hardware wallet (with the exception of security). If the wallet doesn’t currently support the coins you need to store offline, you can’t really take it too seriously as a deciding factor for purchase. Regardless of whether or not they claim to add more coins in the future.

 Needless to say, they have some unique choices for coin support HERE.

 

BC VAULT vs Ledger Nano X: Conclusion

 

Overall, these are two highly regarded hardware wallets with unique properties in its own right. If you want to have the flexibility of being able to use this device on the go and utilize it via a smartphone app, then you should go with the Ledger Nano X. If you want something that has a MASSIVE portfolio support and lots of customizable security, you should go with the BC VAULT.

At the end of the day, it really depends on your personal preference and what your immediate needs are. Now, I have used both of these devices extensively and I have a clear favorite (check out the details in the above video). If I only had to choose one of these devices, I would choose the BC VAULT, it has a very unique and strong security model, it can hold up to 2000 wallets simultaneously, and can support multi-sig, which allows for mutliple users to securely use the same wallet and requires a set number of users in order to send money.

Not only that, you can SECURELY share this device with multiple people as all of these wallets are encrypted and can have multiple custom passwords. I would truly feel confident handing this hardware wallet to my friend with over 10 BTC on it, because I know he will have no way to access the funds within my wallet. I can’t say that about the Ledger Nano X.

All in all, these both are great wallets and you ultimately need to decide what coins you need to store offline, how many coins you need to store at once, and if you need mobile support. These are all very personal, and in my case, I would rather sacrifice the mobile support to have a very easy to use multi-sig hardware wallet with the ability to share it with family, friends, or even a new business.

 

 

 

What do you think? Would you choose the BC Vault over the Ledger Nano X? BC VAULT vs Ledger Nano X! Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

 

SafePal vs Ledger Nano S (2020) | Which Entry Level Hardware Wallet Is Better?

SafePal vs Ledger Nano S! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these entry-level hardware wallets is better and more secure. How big is your portfolio? Do you need mobile OR desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ledger Nano S: Overview

 

 

The Ledger Nano S is a very compact, sleek, and secure device that allows you to store over 1,100 cryptocurrencies at the time of this writing. This is crucial as more altcoins gain acceptance and you need a wide portfolio to protect longer term. Ledger takes their security very seriously and for good reason. There have been a number of exchange hacks and reports of people losing or having their wallets hacked by nefarious individuals throughout history. This is why having this device is so crucial.

Ledger Nano S is a device that is upgraded frequently with new features and firmware upgrades to ensure that it has the latest security protections and new assets being added every single month. Not to mention, it is currently the cheapest among the 3 best-known hardware wallet companies, starting at only $59 USD!

 

Ledger Nano S: Security

 

The Ledger Nano S has an A-grade security setup which sets it apart from the competition. It uses a secure element which holds and stores the private keys in a separate and secure environment from the rest of the operating system. This ensures that if for any reason the rest of the device is somehow compromised, you precious private keys are safe.

It also supports the standards BIP-39 protocol that requires you to setup a recovery seed phrase of 24 words during the initial setup, that allows you to restore your coins to any other wallet in the event you have broken, lost, or somehow cannot gain access to the device itself, so you have a fail safe.

Ledger Nano S: User Experience (UX)

 

 

I will keep this section short and sweet, as I addressed above, this is a sleek and compact device, which makes it very stable and durable. It has a small OLED screen and 2 physical buttons. This is used for navigating apps, verifying your pin to access to the device, confirming a transaction, and generating the recovery seed words upon first time setup.

When entering in your PIN on the device, the right button will function as the “Up” arrow, and the left button the “Down” arrow for scrolling through your selections, then pressing both at the same time will confirm your selection, so it’s pretty intuitive. It has a one port which is micro USB that connects to a cable to a standard USB port that can be used on a MAC or PC.

 

Ledger Nano S: Coin Support

 

Technically, this device supports over 1,000 different coins, with a few caveats below. I will also leave a link for the full list of supported coins HERE.

– You can really only hold 3 or 4 apps on the device at once. I originally only kept 3 apps on the device, as those were the only coins I needed to add at the time. However, when I went to add a 4th, it told me I needed to remove an existing app to make room. The RAM or space is on the device is very limited, so it’s good if you have only 2-3 coins you want to manage at once.

-They require you go through the process of removing and uninstalling all apps and then going in and reinstalling them for EVERY firmware update. This is tedious and really obnoxious for the serious hardware wallet user. I understand you need to have backups and be careful with every upgrade but c’mon, this is the only device I have this issue with.

SafePal: Overview

 

This device was originally created by Binance Labs division and wanted to have a unique approach to a hardware wallet that was cheap enough for the average user, but also supported the Binance chain and added support for their internal projects. This really is a unique entry level hardware wallet, that greatly differs in terms of design, functionality, and overall user experience.

 

SafePal: Security

 

 

This can be considered one of the most attractive features of the device as it’s only $39.99 for this hardware wallet. Yes, you read that right. But why is it so cheap? Well, even though it looks like a very sleek and expensive device, its is made of plastic coating and a very small camera module that is used to transact at a very low resolution.l It’s obvious that they built this as cheaply as they could, while still remaining secure.

This is not necessarily a bad thing, but you also get what you pay for. One of the key features that sets this device apart from most other competing hardware wallets is the fact that there is NO:

  • NFC
  • BLUETOOTH
  • USB
  • CELLULAR
  • EXTERNAL DEVICE CONNECTIONS

This gives it extra security, but it also makes it easier to use, as there are no extra devices necessary for this to operate, other than your smartphone. All you need right out of the box is a charger that supports USB-A to charge the device and a smartphone to download the SafePal App to setup and initialize the device.

SafePal: User Experience (UX)

 

This is the cheapest completely wireless hardware wallet on the market. It interacts only with your smartphone and the camera embedded into the device that allows you to transmit encrypted data via the QR code. This is truly a unique device.

This is a pretty solid introductory hardware wallet. It’s unique from its direct competitors and its simple and easy to use. As mentioned above, it has no connection weaknesses and cannot be hacked by any radio frequency or directly connected internet device. It’s truly a unique wireless hardware wallet that can be used on the go and is one of only a few hardware wallets that are “truly wireless” with no dependence on other devices. Oh, and did I mentioned it’s under $50?

 

SafePal: Coin Support

 

 

This is the one weal point of this product is the lack of coin support, as it only supports: Bitcoin, Ether (and ERC-20 Tokens), BNB, Litecoin, Dash, and Bitcoin Cash. However, they have mentioned that there is Ripple (XRP) and Tron (TRX) coming very shortly. They truly are attempting to add more coins, and over time, if they don’t raise their price, this option will be a slam dunk for most users.

Additionally, I will add that the Binance Chain Coins (BEP2) tokens are also supported as this is a Binance hardware wallet after all. Below Is a full list of coins currently supported.

 

 

SafePal vs Ledger Nano S: Conclusion

 

At the end of the day, these are the two most trusted entry level hardware wallets on the market today. They both have an entry point under $60 (which is very cheap considering the competition), and the SafePal is currently on sale for under $40.

On the one hand, the Ledger Nano S has a massive development team and “technically” supports over 1,000 coins, however, as I mentioned above, it really only allows you to hold 3-4 coins on the device at once. The coin selection is a very nice feature, especially if you want to expand and swap out your portfolio. However, even though the SafePal does not hold nearly as many coins (currently), it is VASTLY more secure.

Having no connection to USB, Bluetooth, or any other transmission method other than an encrypted QR code via a camera, is a very attractive selling point. Not to mention the fact that you don’t need a computer and a USB connection to use it, makes it more accessible for a much larger market.

Personally, it really just depends on your current situation. You need to ask yourself: “What coins do I need to store offline?” “Am I ok with having to use a computer to use this device?” “Do I want to hold more than 3 different coins at once on the device?”. If it were me, I would choose the SafePal. This by NO means the Ledger Nano S is a bad device, I just believe the fact that I can use the SafePal with a smartphone and also having no insecurities makes it a very compelling choice. The fact that it’s currently cheaper is just a bonus.

 

 

What do you think? Would you choose the SafePal over the Ledger Nano S? SafePal vs Ledger Nano S! Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

D’CENT vs Ledger Nano X (2020) | Which Bluetooth Hardware Wallet Is Safer?

D’CENT vs Ledger Nano X! In this comparison, we are going to do a head-to-head of two of the most competitive and popular new cryptocurrency hardware wallets in this edition of the hardware wallet roundups.

I am going to dive into which of these bluetooth hardware wallets is better and more secure. How big is your portfolio? Do you need mobile AND desktop support? Do you use any 3rd party wallets for integration? Do you need web-based access instead of a required download? 

These are all questions you will need to consider when deciding which of these wallets will be best for you. At the end of the day, the coin support is one of the most important factors (besides security) when deciding which hardware wallet is best for you. 

Ultimately, if it doesn’t support the coins you want to store offline, it won’t work for your particular situation. So keep that in mind as we dive into what I consider to be the most important factors when making such an important decision, such as choosing a cryptocurrency hardware wallet.

 

Ledger Nano X: Overview

 

The Nano X comes beautifully packaged with the device itself, a USB-C cable, a set of instructions and recovery seed cards. The previous bulky buttons that were on top of the device are now seamlessly integrated on it in a way that’s even a bit hard to notice. All in all a beautiful design. The primary features of this device are the bluetooth connection which allows you to manage this device using your smartphone via the iOS and Android app.

Additionally, you can now hodl, store, or manage up to 100 cryptos simultaneously, all without access to your desktop or laptop computer. This is easily it’s best new features, but aside from the upgraded storage capacity and the wireless connectivity, the device itself is now larger, has an integrated 2-function button, and an overall larger screen for verifying transactions. With a trusted device and a more universal charging cable, this makes it much more compelling to spend the extra money to store more coins and one that you can easily take with you as you travel.

 

Ledger Nano X: Security

 

 

Ledger is at the forefront of developing the industry’s device security. How? And in what ways?

CC EAL5+ SECURE ELEMENT

Only Ledger’s devices can claim the French cybersecurity agency ANSSI’s full certification.

The Nano X and Nano S both feature what is called a ‘secure element’. The chip seen below is the next generation chip that comes in the Nano X:

The secure chip meets the CC EAL5+ certification and run’s Ledger’s proprietary BOLOS operating system.

According to Ledger:

A Secure Element is a secure chip that…embeds intrinsic countermeasures against many known attacks. This kind of chip is tamper-resistant and protects your device to a range of different attacks.”

 

Ledger Nano X: Coin Support

 

The Ledger Nano X utilizes the “Ledger Live” dashboard which is a desktop application that allows you to manage all of your coins, portfolio, and potential trades in an easy to use application. You can use this on both an iOS or Android app as well as a desktop.

This app allows you to manage up to 1,100 coins that are supported by the device. However, only about 200 of them are “native” apps. This means that you can manage them directly within the Ledger Live app, without having to connect to a 3rd party wallet, such as MyEtherWallet or MyCrypto. I will leave a link HERE with a list of fully supported coins.

 

Ledger Nano X: User Experience

 

 

Honestly, the user experience is a massive upgrade from the Ledger Nano S. With that said, It has a few usability issues that I find to be quite difficult to overcome. Although this device is physically larger than its predecessor, it still has a fairly difficult to use early experience.

For example, the screen is still fairly small and still cannot accommodate a QR code for scanning. This may not seem like a big deal, but after using several hardware wallets, it really does make a big difference. Using a QR code is not only safer (because it removes the chance of error from manually typing in a wallet address), but it is incredibly faster and makes the entire of transacting offline, a much easier experience. 

Although this device has stepped up the quality considerably from it’s latest iteration, I still feel that utilizing an all new form factor could have been beneficial and a little more innovative than replicating their 1st generation device with a few small tweaks.

 

D’CENT Wallet: Overview

 

The D’CENT is a mobile and bluetooth connected wireless hardware wallet device. With additional biometric security and the ease of use, this is a contender for the easiest to use mobile and wireless wallet. So how is it different than Ledger Nano X or other bluetooth devices? The Biometric security is a large differentiator here. It’s super convenient and makes it easy to sign and authenticate transactions on the go.

This means if you want to move your crypto from cold storage to a hot wallet, it can be done quickly and easily. A common scenario here would be if you are trying to pay a friend or you’re shopping and want to pay for a product in store very seamlessly. Let’s take a look at the security, features, and price below to go into a little more detail.

 

 

D’CENT: Security

 

 

The flagship feature of D’CENT is hands down the biometric security feature of the fingerprint sensor. There are some other hardware wallets that communicate with mobile, and can utilize Face ID or Touch ID for extra authentication with their mobile app, but this gives your authentication on the physical device as well. This is a unique and very secure feature that is not used by any other hardware wallet currently on the market.

The hardware wallet features a built-in fingerprint scanner that manages access to the hardware wallet. This security process improves the convenience for the users and enhances the security during access control. It also provides the wallet with fast transaction signing.

 

  • Multi-IC architecture design
  • Bank grade EAL 5+ Secure Element (This is the same security chip used in the Ledger Nano X)
  • Secure OS embedded on microprocessor

 

 

D’CENT: Coin Support

 

The coin support is varied. The D’CENT can store and support Bitcoin, Ethereum, ERC20 tokens, RSK, RRC20 (RSK tokens), Ripple (XRP), and MONACOIN. To many, this may not seem like it is very much, however, a majority of the major tokens are ERC-20 tokens and all can be supported natively on this device, which is good. I have not come across a hardware wallet yet that supports RSK and RRC20 tokens yet natively, so that definitely makes this an exclusive hardware wallet first for the D’CENT wallet!

 

 

D’CENT: User Experience

 

 

One of the main features I like here is the option to generate a valid QR code on the large OLED screen of this device as a way to send funds directly from your smartphone to your D’CENT wallet. This is super convenient and truly makes this a wireless and independent device that can be used on the go via the D’CENT app, which also includes a market price section and of course all of your wallets and current fiat amount stored within each one.

What’s also nice is you no longer need to backup and restore this device for firmware upgrades like you do with other devices (although you can, since this device can also support bluetooth and USB connectivity if you choose). This makes this a very convenient choice when considering the ease of use and security when choosing how to secure your private keys.

 

 

D’CENT vs Ledger Nano X: Conclusion

 

Truth be told, these hardware wallets each have their own unique selling points (as you’ve seen above). It really depends on your situation. For example, if I only wanted to “HODL” the main market cap coins and wasn’t looking to build an expansive portfolio, I would choose the D’CENT wallet. 

Why? Because the user experience in form factor is better (in my opinion) for ease of use, and overall security and the fingerprint authenticator gives me peace of mind. The Ledger Nano X is a solid device with a great track record and a trusted development team behind them. However, the screen size is not much bigger than their 1st generation device, and the form factor and user experience is much the same. 

Overall, if I had to choose between these devices, it would really depend on which coins and the number of coins I needed to hold securely offline. They are both very high quality and fun devices in their own unique way. Having a bluetooth and wireless hardware wallet is really convenient and provides users a way to start using their hardware wallets in real-world scenarios. However, having that extra biometric security is really a game changer.

 

 

What do you think? Would you choose the KeepKey over the Ledger Nano X? Let us know down below in the comments!

 

Cheers,

 

The Crypto Renegade

 

NOTE: This post may contain affiliate links. This adds no cost to you but it helps me focus on giving as much value as possible in every single post by being compensated for recommending products that help people succeed.

Scroll to top